Exhaust and Intake Fans

Fans and motor assemblies are shock mounted for minimum noise and vibration. Interchangeable accessories are available. Motors are shaded pole with permanently lubricated ball bearings, operating at 115 volts, 50/60 cycle, AC single phase with low temperature rise; supplied with 18 inch leads.

Accessories for Exhaust Fans

Guards

Diameter (Inches)	Depth (Inches)	Used With Fan	Catalog Number
7 9/16	2 5/8	EF-165,220,300	GU-6
9 5/8	2 9/16	EF-400	GU-8
10	7/16	EF-550	GU-9
11 5/8	2 7/8	EF-750	GU-10

Accessories for Intake Fans

Panel Mounted Blowers




		IF Series

To Fit Standard 19″ Wide Panel Space
These blowers provide maximum cooling with minimum space requirements at a low noise level with minimum vibration. Panel mounting provisions are for EIA standard 19 inch panel spacing. Permanently lubricated ball bearing motors with lubricant temperature range from -20oC to +148oC, operate on 115 volt, 50/60 cycle, AC, single phase current. Permanent type washable filter is easily removable from the front. Chrome plated grille is supplied with 2 captive thumb nuts. Performance data prepared by an impartial, independent testing laboratory is available on request. Base recessed blowers are available on special order.





	PMB Series Units available to fit standard 24″ wide panel space.

Exhaust and Intake Fans

Accessories for Exhaust Fans

Accessories for Intake Fans

Panel Mounted Blowers

PMB Series Units available to fit standard 24″ wide panel space.

PMB Series
Units available to fit standard 24″ wide panel space.